Technical data

BLADEOS 6.3 Command Reference
368
 Chapter 4: Configuration Commands BMD00186-B, April 2010
ip igmp querier vlan <VLAN number> startup-count <1-10>
Configures the Startup Query Count, which is the number of IGMP Queries sent out at
startup. Each Query is separated by the Startup Query Interval. The default value is 2.
Command mode: Global configuration
ip igmp querier vlan <VLAN number> version [v1|v2|v3]
Configures the IGMP version. The default version is v3.
Command mode: Global configuration
ip igmp querier enable
Enables IGMP Querier.
Command mode: Global configuration
no ip igmp querier enable
Disables IGMP Querier.
Command mode: Global configuration
show ip igmp querier vlan <VLAN number>
Displays IGMP Querier information for the selected VLAN.
Command mode: Global configuration
show ip igmp querier
Displays the current IGMP Filtering parameters.
Command mode: All
Table 230 IGMP Querier Configuration Commands
Command Syntax and Usage