Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 365
IGMP Filter Definition
Table 228 describes the commands used to define an IGMP filter.
Table 228 IGMP Filter Definition Commands
Command Syntax and Usage
ip igmp profile <1-16> range <IP address 1> <IP address 2>
Configures the range of IP multicast addresses for this filter.
Command mode: Global configuration
ip igmp profile <1-16> action {allow|deny}
Allows or denies multicast traffic for the IP multicast addresses specified. The default action
is deny.
Command mode: Global configuration
ip igmp profile <1-16> enable
Enables this IGMP filter.
Command mode: Global configuration
no ip igmp profile <1-16> enable
Disables this IGMP filter.
Command mode: Global configuration
no ip igmp profile <1-16>
Deletes this filter’s parameter definitions.
Command mode: Global configuration
show ip igmp profile <1-16>
Displays the current IGMP filter.
Command mode: All