Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 359
IGMP Configuration
Table 223 describes the commands used to configure basic IGMP parameters.
no aggregate-address <1-16>
Deletes this BGP aggregation.
Command mode: Router BGP
show ip bgp aggregate-address [<1-16>]
Displays the current BGP aggregation configuration.
Command mode: All except User EXEC
Table 223 IGMP Configuration Commands
Command Syntax and Usage
ip igmp enable
Globally turns IGMP on.
Command mode: Global configuration
no ip igmp enable
Globally turns IGMP off.
Command mode: Global configuration
show ip igmp
Displays the current IGMP configuration parameters.
Command mode: All
Table 222 BGP Aggregation Configuration Commands
Command Syntax and Usage