Technical data

BLADEOS 6.3 Command Reference
348
 Chapter 4: Configuration Commands BMD00186-B, April 2010
OSPFv3 Virtual Link Configuration
[no] ipv6 ospf passive-interface
Enables or disables the passive setting on the interface. On a passive interface, OSPFv3
protocol packets are suppressed.
Command mode: Interface IP
ipv6 ospf enable
Enables OSPFv3 on the interface.
Command mode: Interface IP
ipv6 ospf no enable
Disables OSPFv3 on the interface.
Command mode: Interface IP
no ipv6 ospf
Deletes OSPFv3 from interface.
Command mode: Interface IP
show ipv6 ospf interface
Displays the current settings for OSPFv3 interface.
Command mode: Interface IP
Table 215 OSPFv3 Virtual Link Configuration Options
Command Syntax and Usage
area-virtual-link <1-3> area <area index (0-2)>
Configures the OSPF area index.
Command mode: Router OSPF3
area-virtual-link <1-3> hello-interval <1-65535)>
Configures the indicated interval, in seconds, between the hello packets, that the router sends
on the interface.
Command mode: Router OSPF3
Table 214 OSPFv3 Interface Configuration Options
Command Syntax and Usage