Manualshelf

Technical data

ManualsBrandsBlade Network Technologies ManualsComputer equipmentBLADEOS G8124
341342343344345346347348349350
BLADEOS 6.3 Command Reference
346
Chapter 4: Configuration Commands BMD00186-B, April 2010
OSPFv3 Interface Configuration
[no] summary-prefix <1-16> translation
When enabled, the P-bit is set in the generated Type-7 LSA. When disabled, the P-bit is
cleared. The default setting is disabled.
Command mode: Router OSPF3
summary-prefix <1-16> enable
Enables the OSPFv3 AS-external range.
Command mode: Router OSPF3
summary-prefix <1-16> no enable
Disables the OSPFv3 AS-external range.
Command mode: Router OSPF3
no summary-prefix <1-16>
Deletes the OSPFv3 AS-external range.
Command mode: Router OSPF3
show ipv6 ospf summary-prefix <1-16>
Displays the current OSPFv3 AS-external range.
Command mode: All
Table 214 OSPFv3 Interface Configuration Options
Command Syntax and Usage
interface ip <interface number>
Enter Interface IP mode, from Global Configuration mode.
Command mode: Global configuration
ipv6 ospf area <area index (0-2)>
Configures the OSPFv3 area index.
Command mode: Interface IP
Table 213 OSPFv3 AS_External Range Configuration Options
Command Syntax and Usage