Manualshelf

Technical data

ManualsBrandsBlade Network Technologies ManualsComputer equipmentBLADEOS G8124
341342343344345346347348349350
BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
343
area <area index> stability-interval <1-255>
Configures the stability interval for an NSSA, in seconds. When the interval expires, an
elected translator determines that its services are no longer required. The default value is 40.
Command mode: Router OSPF3
area <area index> translation-role always|candidate
Configures the translation role for an NSSA area, as follows:
Always: Type 7 LSAs are always translated into Type 5 LSAs.
Candidate: An NSSA border router participates in the translator election process.
The default setting is candidate.
Command mode: Router OSPF3
area <area index> enable
Enables the OSPF area.
Command mode: Router OSPF3
area <area index> no enable
Disables the OSPF area.
Command mode: Router OSPF3
no area <area index>
Deletes the OSPF area.
Command mode: Router OSPF3
show ipv6 ospf areas
Displays the current OSPFv3 area configuration.
Command mode: All
Table 211 OSPFv3 Area Index Configuration Options
Command Syntax and Usage