Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 335
OSPF Virtual Link Configuration
Table 206 OSPF Virtual Link Configuration Commands
Command Syntax and Usage
area-virtual-link <1-3> area <0-2>
Configures the OSPF area index for the virtual link.
Command mode: Router OSPF
area-virtual-link <1-3> hello-interval <1-65535>
area-virtual-link <1-3> hello-interval <50-65535ms>
Configures the authentication parameters of a hello packet, in seconds or milliseconds. The
default value is 10 seconds.
Command mode: Router OSPF
area-virtual-link <1-3> dead-interval <1-65535>
area-virtual-link <1-3> dead-interval <1000-65535ms>
Configures the health parameters of a hello packet, in seconds or milliseconds. The default
value is 60 seconds.
Command mode: Router OSPF
area-virtual-link <1-3> transit-delay <1-3600>
Configures the delay in transit, in seconds. The default value is one second.
Command mode: Router OSPF
area-virtual-link <1-3> retransmit-interval <1-3600>
Configures the retransmit interval, in seconds. The default value is five seconds.
Command mode: Router OSPF
area-virtual-link <1-3> neighbor-router <IP address>
Configures the router ID of the virtual neighbor. The default value is 0.0.0.0.
Command mode: Router OSPF
[no] area-virtual-link <1-3> key <password>
Configures the password (up to eight characters) for each virtual link. The default setting is
none.
Command mode: Router OSPF