Manualshelf

Technical data

ManualsBrandsBlade Network Technologies ManualsComputer equipmentBLADEOS G8124
331332333334335336337338339340
BLADEOS 6.3 Command Reference
334
Chapter 4: Configuration Commands BMD00186-B, April 2010
[no] ip ospf key <key string>
Sets the authentication key to clear the password.
Command mode: Interface IP
[no] ip ospf message-digest-key <1-255>
Assigns an MD5 key to the interface.
Command mode: Interface IP
[no] ip ospf passive-interface
Sets the interface as passive. On a passive interface, you can disable OSPF protocol
exchanges, but the router advertises the interface in its LSAs so that IP connectivity to the
attached network segment will be established.
Command mode: Interface IP
[no] ip ospf point-to-point
Sets the interface as point-to-point.
Command mode: Interface IP
ip ospf enable
Enables OSPF interface.
Command mode: Interface IP
no ip ospf enable
Disables OSPF interface.
Command mode: Interface IP
no ip ospf
Deletes the OSPF interface.
Command mode: Interface IP
show interface ip <interface number> ospf
Displays the current settings for OSPF interface.
Command mode: All except User EXEC
Table 205 OSPF Interface Configuration Commands
Command Syntax and Usage