Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 327
RIP Route Redistribution Configuration
The following table describes the RIP Route Redistribution commands.
Table 201 RIP Redistribution Commands
Command Syntax and Usage
redistribute {fixed|static|ospf|eospf|ebgp|ibgp} <1-32>
Adds selected routing maps to the RIP route redistribution list. To add specific route maps,
enter routing map numbers, separated by a comma ( , ). To add all 32 route maps, type all.
The routes of the redistribution protocol matched by the route maps in the route redistribution
list will be redistributed.
Command mode: Router RIP
no redistribute {fixed|static|ospf|eospf|ebgp|ibgp} <1-32>
Removes the route map from the RIP route redistribution list.
To remove specific route maps, enter routing map numbers, separated by a comma ( , ). To
remove all 32 route maps, type all.
Command mode: Router RIP
redistribute {fixed|static|ospf|eospf|ebgp|ibgp} export <1-15>
Exports the routes of this protocol in which the metric and metric type are specified. To
remove a previous configuration and stop exporting the routes of the protocol, enter none.
Command mode: Router RIP
show ip rip redistribute
Displays the current RIP route redistribute configuration.
Command mode: All except User EXEC