Manualshelf

Technical data

ManualsBrandsBlade Network Technologies ManualsComputer equipmentBLADEOS G8124
321322323324325326327328329330
BLADEOS 6.3 Command Reference
324
Chapter 4: Configuration Commands BMD00186-B, April 2010
Routing Information Protocol Configuration
RIP commands are used for configuring Routing Information Protocol parameters. This option is
turned off by default.
Table 199 Routing Information Protocol Commands
Command Syntax and Usage
router rip
Enter Router RIP configuration mode.
Command mode: Router RIP
timers update <1-120>
Configures the time interval for sending for RIP table updates, in seconds.
The default value is 30 seconds.
Command mode: Router RIP
enable
Globally turns RIP on.
Command mode: Router RIP
no enable
Globally turns RIP off.
Command mode: Router RIP
show ip rip
Displays the current RIP configuration.
Command mode: All except User EXEC