Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 323
Autonomous System Filter Path Configuration
Note – The rmap number and the path number represent the AS path you wish to configure.
Table 198 AS Filter Configuration Commands
Command Syntax and Usage
as-path-list <1-8> as-path <1-65535>
Sets the Autonomous System filter’s path number.
Command mode: Route map
as-path-list <1-8> action {permit|deny}
Permits or denies Autonomous System filter action.
Command mode: Route map
as-path-list <1-8> enable
Enables the Autonomous System filter.
Command mode: Route map
no as-path-list <1-8> enable
Disables the Autonomous System filter.
Command mode: Route map
no as-path-list <1-8>
Deletes the Autonomous System filter.
Command mode: Route map
show route-map <1-32> as-path-list <1-8>
Displays the current Autonomous System filter configuration.
Command mode: All except User EXEC