Technical data

BLADEOS 6.3 Command Reference
322
 Chapter 4: Configuration Commands BMD00186-B, April 2010
IP Access List Configuration
Note – The route map number (1-32) and the access list number (1-8) represent the IP access list
you wish to configure.
Table 197 IP Access List Configuration Commands
Command Syntax and Usage
[no] access-list <1-8> match-address <1-256>
Sets the network filter number.
Command mode: Route map
See “Network Filter Configuration” on page 318 for details.
[no] access-list <1-8> metric <1-4294967294>
Sets the metric value in the AS-External (ASE) LSA.
Command mode: Route map
access-list <1-8> action {permit|deny}
Permits or denies action for the access list.
Command mode: Route map
access-list <1-8> enable
Enables the access list.
Command mode: Route map
no access-list <1-8> enable
Disables the access list.
Command mode: Route map
no access-list <1-8>
Deletes the access list.
Command mode: Route map
show route-map <1-32> access-list <1-8>
Displays the current Access List configuration.
Command mode: All except User EXEC