Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 321
[no] metric-type {1|2}
Assigns the type of OSPF metric. The default is type 1.
 Type 1—External routes are calculated using both internal and external metrics.
 Type 2—External routes are calculated using only the external metrics. Type 1 routes
have more cost than Type 2.
 none—Removes the OSPF metric.
Command mode: Route map
precedence <1-255>
Sets the precedence of the route map. The smaller the value, the higher the precedence.
Default value is 10.
Command mode: Route map
[no] weight <0-65534>
Sets the weight of the route map.
Command mode: Route map
enable
Enables the route map.
Command mode: Route map
no enable
Disables the route map.
Command mode: Route map
no route-map <1-32>
Deletes the route map.
Command mode: Route map
show route-map [<1-32>]
Displays the current route configuration.
Command mode: All except User EXEC
Table 196 Routing Map Configuration Commands
Command Syntax and Usage