Technical data

BLADEOS 6.3 Command Reference
306
 Chapter 4: Configuration Commands BMD00186-B, April 2010
vlan <VLAN number>
Configures the VLAN number for this interface. Each interface can belong to one VLAN.
IPv4: Each VLAN can contain multiple IPv4 interfaces.
IPv6: Each VLAN can contain only one IPv6 interface.
Command mode: Interface IP
[no] relay
Enables or disables the BOOTP relay on this interface. It is enabled by default.
Command mode: Interface IP
[no] ip6host
Enables or disables the IPv6 Host Mode on this interface. The default value is disabled for
data interfaces, and enabled for the management interface.
Command mode: Interface IP
enable
Enables this IP interface.
Command mode: Interface IP
no enable
Disables this IP interface.
Command mode: Interface IP
no interface ip <interface number>
Removes this IP interface.
Command mode: Interface IP
show interface ip <interface number>
Displays the current interface settings.
Command mode: All
Table 186 IP Interface Configuration Commands
Command Syntax and Usage