Technical data
BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
305
IP Interface Configuration
The G8124 supports up to 128 IP interfaces. Each IP interface represents the G8124 on an IP subnet
on your network. The Interface option is disabled by default.
Interface 127 and interface 128 are reserved for switch management, as follows:
IF 127: Management port B
IF 128: Management port A
Table 186 IP Interface Configuration Commands
Command Syntax and Usage
interface ip <interface number>
Enter IP interface mode.
Command mode: Global configuration
ip address <IP address> [<IP netmask>]
Configures the IP address of the switch interface, using dotted decimal notation.
Command mode: Interface IP
ip netmask <IP netmask>
Configures the IP subnet address mask for the interface, using dotted decimal notation.
Command mode: Interface IP
ipv6 address <IP address (such as 3001:0:0:0:0:0:abcd:12)>
[anycast|enable|no enable]
Configures the IPv6 address of the switch interface, using hexadecimal format with colons.
Command mode: Interface IP
ipv6 secaddr6 address <IP address (such as 3001:0:0:0:0:0:abcd:12)>
<prefix length> [anycast]
Configures the secondary IPv6 address of the switch interface, using hexadecimal format
with colons.
Command mode: Interface IP
ipv6 prefixlen <IPv6 prefix length (1-128)>
Configures the subnet IPv6 prefix length. The default value is 0 (zero).
Command mode: Interface IP