Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 303
Layer 3 Configuration
The following table describes basic Layer 3 Configuration commands. The following sections
provide more detailed information and commands
.
Table 185 Layer 3 Configuration Commands
Command Syntax and Usage
interface ip <interface number>
Configures the IP Interface. The G8124 supports up to 128 IP interfaces. However, IP
interface 127 and 128 are reserved for switch management.
Command mode: Global configuration
To view command options, see page 305.
route-map {<1-32>}
Enter IP Route Map mode.
Command mode: Global configuration
To view command options, see page 320.
router rip
Configures the Routing Interface Protocol.
Command mode: Global configuration
To view command options, see page 324.
router ospf
Configures OSPF.
Command mode: Global configuration
To view command options, see page 328.
ipv6 router ospf
Enters OSPFv3 configuration mode.
Command mode: Global configuration
To view command options, see page 339.