Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 301
Private VLAN Configuration
Use the following commands to configure Private VLAN.
Table 184 Private VLAN commands
Command Syntax and Usage
private-vlan type primary
Configures the VLAN type as a Primary VLAN.
A Private VLAN must have only one primary VLAN. The primary VLAN carries
unidirectional traffic to ports on the isolated VLAN or to community VLAN.
Command mode: VLAN
private-vlan type community
Configures the VLAN type as a community VLAN.
Community VLANs carry upstream traffic from host ports. A Private VLAN may have
multiple community VLANs.
Command mode: VLAN
private-vlan type isolated
Configures the VLAN type as an isolated VLAN.
The isolated VLAN carries unidirectional traffic from host ports. A Private VLAN may have
only one isolated VLAN.
Command mode: VLAN
no private-vlan type
Clears the private-VLAN type.
Command mode: VLAN
[no] private-vlan map [<2-4094>]
Configures Private VLAN mapping between a secondary VLAN and a primary VLAN. Enter
the primary VLAN ID. Secondary VLANs have the type defined as isolated or
community. Use the no form to remove the mapping between the secondary VLAN and the
primary VLAN.
Command mode: VLAN