Technical data

BLADEOS 6.3 Command Reference
300
 Chapter 4: Configuration Commands BMD00186-B, April 2010
Note – All ports must belong to at least one VLAN. Any port which is removed from a VLAN and
which is not a member of any other VLAN is automatically added to default VLAN 1. You cannot
remove a port from VLAN 1 if the port has no membership in any other VLAN. Also, you cannot
add a port to more than one VLAN unless the port has VLAN tagging turned on.
enable
Enables this VLAN.
Command mode: VLAN
no enable
Disables this VLAN without removing it from the configuration.
Command mode: VLAN
no vlan <VLAN number>
Deletes this VLAN.
Command mode: VLAN
show vlan information
Displays the current VLAN configuration.
Command mode: All
Table 183 VLAN Configuration Commands
Command Syntax and Usage