Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 299
VLAN Configuration
These commands configure VLAN attributes, change the status of each VLAN, change the port
membership of each VLAN, and delete VLANs.
By default, VLAN 1 is the only VLAN configured on the switch. All ports are members of
VLAN 1 by default. Up to 1024 VLANs can be configured on the G8124.
VLANs can be assigned any number between 1 and 4094. VLAN 4095 is reserved for switch
management.
Table 183 VLAN Configuration Commands
Command Syntax and Usage
vlan <VLAN number>
Enter VLAN configuration mode.
Command mode: Global configuration
name <1-32 characters>
Assigns a name to the VLAN or changes the existing name. The default VLAN name is the
first one.
Command mode: VLAN
stg <STG number>
Assigns a VLAN to a Spanning Tree Group.
Command mode: VLAN
[no] vmap <1-128> [serverports|non-serverports]
Adds or removes a VLAN Map to the VLAN membership. You can choose to limit operation
of the VLAN Map to server ports only or non-server ports only. If you do not select a port
type, the VMAP is applied to the entire VLAN.
Command mode: VLAN
member <port alias or number>
Adds port(s) to the VLAN membership.
Command mode: VLAN
no member <port alias or number>
Removes port(s) from this VLAN.
Command mode: VLAN