Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 295
Hot Links Configuration
Use these commands to configure Hot Links. For more information about Hot Links, see “Hot
Links” in the BLADEOS 6.3 Application Guide.
Table 179 Hot Links Configuration Commands
Command Syntax and Usage
[no] hotlinks bpdu
Enables or disables the ability to flood BPDUs on the active Hot Links interface when the
interface belongs to a Spanning Tree group that is globally turned off.
The default value is disabled.
Command mode: Global configuration
[no] hotlinks fdb-update
Enables or disables FDB Update, which allows the switch to send FDB and MAC update
packets over the active interface.
The default value is disabled.
Command mode: Global configuration
hotlinks enable
Globally enables Hot Links.
Command mode: Global configuration
no hotlinks enable
Globally disables Hot Links.
Command mode: Global configuration
show hotlinks
Displays current Hot Links parameters.
Command mode: All