Technical data

BLADEOS 6.3 Command Reference
294
 Chapter 4: Configuration Commands BMD00186-B, April 2010
Failover Manual Monitor Control Configuration
Use these commands to define the port link(s) to control. The Manual Monitor Control
configuration accepts any non-management port.
Table 178 Failover Manual Monitor Control commands
Command Syntax and Usage
failover trigger <1-8> mmon control member <port alias or number>
Adds the selected port to the Manual Monitor Control configuration.
Command mode: Global configuration
no failover trigger <1-8> mmon control member <port alias or number>
Removes the selected port from the Manual Monitor Control configuration.
Command mode: Global configuration
failover trigger <1-8> mmon control portchannel <trunk number>
Adds the selected trunk group to the Manual Monitor Control configuration.
Command mode: Global configuration
no failover trigger <1-8> mmon control portchannel <trunk number>
Removes the selected trunk group from the Manual Monitor Control configuration.
Command mode: Global configuration
failover trigger <1-8> mmon control adminkey <1-65535>
Adds an LACP admin key to the Manual Monitor Control configuration. LACP trunks formed
with this admin key will be included in the Manual Monitor Control configuration.
Command mode: Global configuration
no failover trigger <1-8> mmon control adminkey <1-65535>
Removes an LACP admin key from the Manual Monitor Control configuration.
Command mode: Global configuration
show failover trigger <1-8>
Displays the current Failover settings.
Command mode: All except User EXEC