Technical data

BLADEOS 6.3 Command Reference
286
 Chapter 4: Configuration Commands BMD00186-B, April 2010
By default, each trunk group is empty and disabled.
Table 170 Trunk Configuration Commands
Command Syntax and Usage
portchannel <1-12> port <port alias or number>
Adds a physical port to the current trunk group. You can add several ports, with each port
separated by a comma ( , ).
Command mode: Global configuration
no portchannel <1-12> port <port alias or number>
Removes a physical port from the current trunk group.
Command mode: Global configuration
[no] portchannel <1-12> enable
Enables or Disables the current trunk group.
Command mode: Global configuration
no portchannel <1-12>
Removes the current trunk group configuration.
Command mode: Global configuration
show portchannel <1-12>
Displays current trunk group parameters.
Command mode: All