Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 283
LLDP Port Configuration
Use the following commands to configure LLDP port options.
LLDP Optional TLV configuration
Use the following commands to configure LLDP port TLV (Type, Length, Value) options for the
selected port.
Table 168 LLDP Port commands
Command Syntax and Usage
lldp admin-status {disabled|tx_only|rx_only|tx_rx}
Configures the LLDP transmission type for the port, as follows:
 Transmit only
 Receive only
 Transmit and receive
 Disabled
The default setting is tx_rx.
Command mode: Interface port
[no] lldp trap-notification
Enables or disables SNMP trap notification for LLDP messages.
Command mode: Interface port
show interface port <port alias or number> lldp
Display current LLDP port configuration.
Command mode: All
Table 169 Optional TLV commands
Command Syntax and Usage
[no] lldp tlv portdesc
Enables or disables the Port Description information type.
Command mode: Interface port
[no] lldp tlv sysname
Enables or disables the System Name information type.
Command mode: Interface port