Manualshelf

Technical data

ManualsBrandsBlade Network Technologies ManualsComputer equipmentBLADEOS G8124
281282283284285286287288289290
BLADEOS 6.3 Command Reference
282
Chapter 4: Configuration Commands BMD00186-B, April 2010
lldp reinit-delay <1-10>
Configures the re-initialization delay interval, in seconds. The re-initialization delay allows
the port LLDP information to stabilize before transmitting LLDP messages.
The default value is 2.
Command mode: Global configuration
lldp enable
Globally turns LLDP on. The default setting is off.
Command mode: Global configuration
no lldp enable
Globally turns LLDP off.
Command mode: Global configuration
show lldp
Display current LLDP configuration.
Command mode: All
Table 167 LLDP commands
Command Syntax and Usage