Technical data
BLADEOS 6.3 Command Reference
280
Chapter 4: Configuration Commands BMD00186-B, April 2010
Forwarding Database Configuration
Use the following commands to configure the Forwarding Database (FDB).
Static FDB Configuration
Use the following commands to configure static entries in the Forwarding Database (FDB).
Table 165 FDB configuration commands
Command Syntax and Usage
mac-address-table aging <0-65535>
Configures the aging value for FDB entries, in seconds. The default value is 300.
Command mode: Global configuration
show mac-address-table
Display current FDB configuration.
Command mode: All except User EXEC
Table 166 FDB configuration commands
Command Syntax and Usage
mac-address-table static <MAC address> <VLAN number>
<port alias or number>
Adds a permanent FDB entry. Enter the MAC address using the following format,
xx:xx:xx:xx:xx:xx
For example, 08:00:20:12:34:56
You can also enter the MAC address as follows:
xxxxxxxxxxxx
For example, 080020123456
Command mode: Global configuration
no mac-address-table static <MAC address> <VLAN number>
Deletes a permanent FDB entry.
Command mode: Global configuration