Technical data

BLADEOS 6.3 Command Reference
268
 Chapter 4: Configuration Commands BMD00186-B, April 2010
AMP Group Configuration
Use the following commands to configure an AMP group.
default active-multipath
Resets Active MultiPath parameters to their default values, and optionally delete all AMP
groups.
Command mode: Global configuration
show active-multipath
Displays the current AMP parameters.
Command mode: All
Table 157 AMP Group Configuration Options
Command Syntax and Usage
[no] active-multipath group <AMP group number> port <port alias or number>
Adds the port as the first port in the AMP group.
Command mode: Global configuration
[no] active-multipath group <AMP group number> port2
<port alias or number>
Adds the port as the second port in the AMP group.
Command mode: Global configuration
[no] active-multipath group <AMP group number> portchannel
lacp <1-65535>
Adds the first LACP admin key to the AMP group. LACP trunks formed with this admin key
will be used for AMP communication.
Command mode: Global configuration
[no] active-multipath group <AMP group number> portchannel2
lacp <1-65535>
Adds the second LACP admin key to the AMP group. LACP trunks formed with this admin
key will be used for AMP communication.
Command mode: Global configuration
Table 156 AMP Configuration Options
Command Syntax and Usage