Technical data

BLADEOS 6.3 Command Reference
260
 Chapter 4: Configuration Commands BMD00186-B, April 2010
Re-marking In-Profile Configuration
default access-control list <1-127> re-mark
Sets the ACL Re-mark configuration to its default values.
Command mode: Global configuration
show access-control list <1-127> re-mark
Displays current Re-mark parameters.
Command mode: All
Table 150 ACL Re-marking In-Profile commands
Command Syntax and Usage
access-control list <1-127> re-mark in-profile dscp <0-63>
Sets the DiffServ Code Point (DSCP) of in-profile packets to the selected value.
Command mode: Global configuration
no access-control list <1-127> re-mark in-profile dscp
Disables use of DSCP value for in-profile traffic.
Command mode: Global configuration
show access-control list <1-127> re-mark
Displays current Re-mark parameters.
Command mode: All
Table 149 Re-marking Configuration Commands
Command Syntax and Usage