Technical data

BLADEOS 6.3 Command Reference
26
 Chapter 1: ISCLI Basics BMD00186-B, April 2010
Note – With the exception of the “admin” user, access to each user level can be disabled by setting
the password to an empty value.
Idle Timeout
By default, the switch will disconnect your Telnet session after ten minutes of inactivity. This function
is controlled by the following command, which can be set from 1 to 60 minutes:
system idle <1-60>
Command mode: Global Configuration
Table 4 User Access Levels
User Account Description and Tasks Performed Password
User The User has no direct responsibility for switch management.
He or she can view all switch status information and statistics,
but cannot make any configuration changes to the switch.
user
Operator The Operator can make temporary changes that are lost when
the switch is rebooted/reset. Operators have access to the switch
management features used for daily switch operations.
Administrator The superuser Administrator has complete access to all
command modes, information, and configuration commands on
the RackSwitch G8124, including the ability to change both the
user and administrator passwords.
admin