Manualshelf

Technical data

ManualsBrandsBlade Network Technologies ManualsComputer equipmentBLADEOS G8124
251252253254255256257258259260
BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
259
ACL Re-Mark Configuration
You can choose to re-mark IP header data for the selected ACL. You can configure different
re-mark values, based on whether packets fall within the ACL Metering profile, or out of the ACL
Metering profile.
default access-control list <1-127> meter
Sets the ACL meter configuration to its default values.
Command mode: Global configuration
no access-control list <1-127> meter
Deletes the selected ACL meter.
Command mode: Global configuration
show access-control list <1-127> meter
Displays current ACL Metering parameters.
Command mode: All
Table 149 Re-marking Configuration Commands
Command Syntax and Usage
access-control list <1-127> re-mark dot1p <0-7>
Defines the 802.1p value. The value is the priority bits information in the packet structure.
Command mode: Global configuration
no access-control list <1-127> re-mark dot1p
Disables use of 802.1p value for re-marked packets.
Command mode: Global configuration
Table 148 ACL Metering Configuration Commands
Command Syntax and Usage