Technical data

BLADEOS 6.3 Command Reference
258
 Chapter 4: Configuration Commands BMD00186-B, April 2010
ACL Metering Configuration
These commands define the Access Control profile for the selected ACL.
default access-control list <1-127> tcp-udp
Resets the TCP/UDP parameters for the ACL to their default values.
Command mode: Global configuration
show access-control list <1-127> tcp-udp
Displays the current TCP/UDP Filtering parameters.
Command mode: All
Table 148 ACL Metering Configuration Commands
Command Syntax and Usage
access-control list <1-127> meter committed-rate <64-10000>
Configures the committed rate, in megabits per second. The committed rate must be a
multiple of 64.
Command mode: Global configuration
access-control list <1-127> meter maximum-burst-size <32-4096>
Configures the maximum burst size, in Kilobits. Enter one of the following values for
mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096
Command mode: Global configuration
[no] access-control list <1-127> meter enable
Enables or disables ACL Metering.
Command mode: Global configuration
access-control list <1-127> meter action {drop|pass}
Configures the ACL Meter to either drop or pass out-of-profile traffic.
Command mode: Global configuration
Table 147 TCP/UDP Filtering Configuration Commands
Command Syntax and Usage