Manualshelf

Technical data

ManualsBrandsBlade Network Technologies ManualsComputer equipmentBLADEOS G8124
251252253254255256257258259260
BLADEOS 6.3 Command Reference
256
Chapter 4: Configuration Commands BMD00186-B, April 2010
[no] access-control list <1-127> ipv4 protocol <0-255>
Defines an IP protocol for the ACL. If defined, traffic from the specified protocol matches
this filter. Specify the protocol number. Listed below are some of the well-known protocols.
Number Name
1 icmp
2 igmp
6 tcp
17 udp
89 ospf
112 vrrp
Command mode: Global configuration
[no] access-control list <1-127> ipv4 type-of-service <0-255>
Defines a Type of Service (ToS) value for the ACL. For more information on ToS, refer to
RFC 1340 and 1349.
Command mode: Global configuration
default access-control list <1-127> ipv4
Resets the IPv4 parameters for the ACL to their default values.
Command mode: Global configuration
show access-control list <1-127> ipv4
Displays the current IPV4 parameters.
Command mode: All
Table 146 IP version 4 Filtering Configuration Commands
Command Syntax and Usage