Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
255
IPv4 Filtering Configuration
These commands allow you to define IPv4 matching criteria for an ACL.
no access-control list <1-127> ethernet
Removes Ethernet parameters for the ACL.
Command mode: Global configuration
show access-control list <1-127> ethernet
Displays the current Ethernet parameters for the ACL.
Command mode: All
Table 146 IP version 4 Filtering Configuration Commands
Command Syntax and Usage
[no] access-control list <1-127> ipv4 source-ip-address
<IP address> <IP mask>
Defines a source IP address for the ACL. If defined, traffic with this source IP address will
match this ACL. Specify an IP address in dotted decimal notation.
Command mode: Global configuration
[no] access-control list <1-127> ipv4 destination-ip-address
<IP address> <IP mask>
Defines a destination IP address for the ACL. If defined, traffic with this destination IP
address will match this ACL.
Command mode: Global configuration
Table 145 Ethernet Filtering Configuration Commands
Command Syntax and Usage