Technical data

BLADEOS 6.3 Command Reference
254
 Chapter 4: Configuration Commands BMD00186-B, April 2010
Ethernet Filtering Configuration
These commands allow you to define Ethernet matching criteria for an ACL.
Table 145 Ethernet Filtering Configuration Commands
Command Syntax and Usage
[no] access-control list <1-127> ethernet
source-mac-address <MAC address> <MAC mask>
Defines the source MAC address for this ACL.
Command mode: Global configuration
[no] access-control list <1-127> ethernet
destination-mac-address <MAC address> <MAC mask>
Defines the destination MAC address for this ACL.
Command mode: Global configuration
[no] access-control list <1-127> ethernet vlan <VLAN ID> <VLAN mask>
Defines a VLAN number and mask for this ACL.
Command mode: Global configuration
[no] access-control list <1-127> ethernet ethernet-type
{arp|ip|ipv6|mpls|rarp|any|<other (0x600-0xFFFF)>}
Defines the Ethernet type for this ACL.
Command mode: Global configuration
[no] access-control list <1-127> ethernet priority <0-7>
Defines the Ethernet priority value for the ACL.
Command mode: Global configuration
default access-control list <1-127> ethernet
Resets Ethernet parameters for the ACL to their default values.
Command mode: Global configuration