Technical data

BLADEOS 6.3 Command Reference
244
 Chapter 4: Configuration Commands BMD00186-B, April 2010
Port Error Disable and Recovery Configuration
The Error Disable and Recovery feature allows the switch to automatically disable a port if an error
condition is detected on the port. The port remains in the error-disabled state until it is re-enabled
manually, or re-enabled automatically by the switch after a timeout period has elapsed. The
error-disabled state of a port does not persist across a system reboot.
no shutdown
Enables the port.
Command mode: Interface port
shutdown
Disables the port. (To temporarily disable a port without changing its configuration attributes,
refer to “Temporarily Disabling a Port” on page 246.)
Command mode: Interface port
show interface port <port alias or number>
Displays current port parameters.
Command mode: All
Table 134 Port Error Disable Commands
Command Syntax and Usage
errdisable recovery
Enables automatic error-recovery for the port. The default setting is enabled.
Note: Error-recovery must be enabled globally before port-level commands become active.
Command mode: Interface port
no errdisable recovery
Enables automatic error-recovery for the port.
Command mode: Interface port
show interface port <port alias or number> errdisable
Displays current port Error Disable parameters.
Command mode: All
Table 133 Port Configuration Commands
Command Syntax and Usage