Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 243
[no] tag-pvid
Disables or enables VLAN tag persistence. When disabled, the VLAN tag is removed from
packets whose VLAN tag matches the port PVID. The default setting is disabled.
Command mode: Interface port
[no] flood-blocking
Enables or disables port Flood Blocking. When enabled, unicast and multicast packets with
unknown destination MAC addresses are blocked from the port.
Command mode: Interface port
[no] mac-address-table mac-notification
Enables or disables MAC Address Notification. With MAC Address Notification enabled, the
switch generates a syslog message when a MAC address is added or removed from the MAC
address table.
Command mode: Global configuration
[no] learning
Enables or disables FDB learning on the port.
Command mode: Interface port
[no] broadcast-threshold <100-10000>
Limits the number of broadcast packets per second to the specified value. If disabled, the port
forwards all broadcast packets.
Command mode: Interface port
[no] multicast-threshold <100-10000>
Limits the number of multicast packets per second to the specified value. If disabled, the port
forwards all multicast packets.
Command mode: Interface port
[no] dest-lookup-threshold <100-10000>
Limits the number of unknown unicast packets per second to the specified value. If disabled,
the port forwards all unknown unicast packets.
Command mode: Interface port
Table 133 Port Configuration Commands
Command Syntax and Usage