Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 241
sFlow Port Configuration
Use the following commands to configure the sFlow port on the switch.
Server Port Configuration
Use these commands to define a list of server ports. Ports that are not configured as server ports are
considered to be uplink ports. VMready learns Virtual Machine information only from server ports.
Table 131 sFlow Port Configuration commands
Command Syntax and Usage
[no] sflow polling <5-60>
Configures the sFlow polling interval, in seconds. The default setting is disabled.
Command mode: Interface port
[no] sflow sampling <1-16777215>
Configures the sFlow sampling rate, in packets per sample. The default setting is disabled.
Command mode: Interface port
Table 132 Server Port Configuration Options
Command Syntax and Usage
system server-ports port <1-24>
Adds one or more port physical ports to the list of server ports.
no system server-ports port <1-24>
Removes one of more ports from the list of server ports.
show system server-ports
Displays the current server port configuration.