Technical data

BLADEOS 6.3 Command Reference
240
 Chapter 4: Configuration Commands BMD00186-B, April 2010
sFlow Configuration
BLADEOS supports sFlow version 5. sFlow is a sampling method used for monitoring high speed
switched networks. Use these commands to configure the sFlow agent on the switch.
no system custom-dst enable
Disables the Custom Daylight Savings Time settings.
Command mode: Global configuration
show custom-dst
Displays the current Custom DST configuration.
Command mode: All except User EXEC
Table 130 sFlow Configuration Options
Command Syntax and Usage
sflow enable
Enables the sFlow agent.
Command mode: Global configuration
no sflow enable
Disables the sFlow agent.
Command mode: Global configuration
sflow server <IP address> [-ma|-mgta|-mb|-mgtb|-d|-data]
Defines the sFlow server address and interface port.
Command mode: Global configuration
sflow port <1-65535>
Configures the UDP port for the sFlow server. The default value is 6343.
Command mode: Global configuration
show sflow
Displays sFlow configuration parameters.
Command mode: All
Table 129 Custom DST Options
Command Syntax and Usage