Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 235
System User ID Configuration
access user administrator-password
Sets the administrator (admin) password. This command will prompt for required
information: current admin password, new password (up to 128 characters) and confirmation of
the new password.
Access includes “oper” functions.
Command mode: Global configuration
show access user
Displays the current user status.
Command mode: All except User EXEC
Table 126 User ID Configuration Commands
Command Syntax and Usage
access user <1-10> level {user|operator|administrator}
Sets the Class-of-Service to define the user’s authority level. BLADEOS defines these levels
as: User, Operator, and Administrator, with User being the most restricted level.
Command mode: Global configuration
access user <1-10> name <1-8 characters>
Defines the user name of maximum eight characters.
Command mode: Global configuration
access user <1-10> password
Sets the user (user) password. This command will prompt for required information: current
admin password, new password (up to 128 characters) and confirmation of the new password.
Command mode: Global configuration
access user <1-10> enable
Enables the user ID.
Command mode: Global configuration
Table 125 User Access Control Configuration Commands
Command Syntax and Usage