Technical data

BLADEOS 6.3 Command Reference
234
 Chapter 4: Configuration Commands BMD00186-B, April 2010
User Access Control Configuration
The following table describes user-access control commands.
Passwords can be a maximum of 128 characters.
show access management-network
Displays the current management network configuration.
Command mode: All except User EXEC
clear access management-network
Removes all defined management networks.
Command mode: Global configuration
Table 125 User Access Control Configuration Commands
Command Syntax and Usage
access user eject <user name>
Ejects the specified user from the G8124.
Command mode: Global configuration
access user user-password
Sets the user (user) password. This command will prompt for required information: current
admin password, new password (up to 128 characters) and confirmation of the new password.
Command mode: Global configuration
access user operator-password
Sets the operator (oper)password. This command will prompt for required information:
current admin password, new password (up to 128 characters) and confirmation of the new
password.
Command mode: Global configuration
Table 124 Management Network Configuration Commands
Command Syntax and Usage