Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 231
SNMPv3 Notify Table Configuration
SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system
for particular events or conditions, and generates Notification-Class messages based on these events
or conditions.
Table 122 Notify Table Commands
Command Syntax and Usage
snmp-server notify <1-16> name <1-32 characters>
Defines a locally arbitrary, but unique, identifier associated with this SNMP notify entry.
Command mode: Global configuration
snmp-server notify <1-16> tag <1-255 characters>
Allows you to configure a tag that contains a tag value which is used to select entries in the
Target Address Table. Any entry in the snmpTargetAddrTable, that matches the value
of this tag, is selected.
Command mode: Global configuration
no snmp-server notify <1-16>
Deletes the notify table entry.
Command mode: Global configuration
show snmp-server v3 notify <1-16>
Displays the current notify table configuration.
Command mode: All