Technical data

BLADEOS 6.3 Command Reference
230
 Chapter 4: Configuration Commands BMD00186-B, April 2010
snmp-server target-parameters <1-16> user-name <1-32 characters>
Defines the name that identifies the user in the USM table (page 222) on whose behalf the
SNMP messages are generated using this entry.
Command mode: Global configuration
snmp-server target-parameters <1-16> level
{noAuthNoPriv|authNoPriv|authPriv}
Allows you to select the level of security to be used when generating the SNMP messages
using this entry. The level noAuthNoPriv means that the SNMP message will be sent
without authentication and without using a privacy protocol. The level authNoPriv means
that the SNMP message will be sent with authentication but without using a privacy protocol.
The authPriv means that the SNMP message will be sent both with authentication and
using a privacy protocol.
Command mode: Global configuration
no snmp-server target-parameters <1-16>
Deletes the targetParamsTable entry.
Command mode: Global configuration
show snmp-server v3 target-parameters <1-16>
Displays the current targetParamsTable configuration.
Command mode: All
Table 121 Target Parameters Table Configuration Commands
Command Syntax and Usage