Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 227
SNMPv3 Community Table Configuration
These commands are used for configuring the community table entry. The configured entry is stored
in the community table list in the SNMP engine. This table is used to configure community strings
in the Local Configuration Datastore (LCD) of SNMP engine.
Table 119 SNMPv3 Community Table Configuration Commands
Command Syntax and Usage
snmp-server community <1-16> index <1-32 characters>
Allows you to configure the unique index value of a row in this table.
Command string: Global configuration
snmp-server community <1-16> name <1-32 characters>
Defines the user name as defined in the following command on page 222:
snmp-server user <1-16> name <1-32 characters>
Command string: Global configuration
snmp-server community <1-16> user-name <1-32 characters>
Defines a readable string that represents the corresponding value of an SNMP community
name in a security model.
Command mode: Global configuration
snmp-server community <1-16> tag <1-255 characters>
Allows you to configure a tag. This tag specifies a set of transport endpoints to which a
command responder application sends an SNMP trap.
Command mode: Global configuration
no snmp-server community <1-16>
Deletes the community table entry.
Command mode: Global configuration
show snmp-server v3 community <1-16>
Displays the community table configuration.
Command mode: All