Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 225
snmp-server access <1-32> level {noAuthNoPriv|authNoPriv|authPriv}
Defines the minimum level of security required to gain access rights. The level
noAuthNoPriv means that the SNMP message will be sent without authentication and
without using a privacy protocol. The level authNoPriv means that the SNMP message
will be sent with authentication but without using a privacy protocol. The authPriv means
that the SNMP message will be sent both with authentication and using a privacy protocol.
Command mode: Global configuration
snmp-server access <1-32> read-view <1-32 characters>
Defines a read view name that allows you read access to a particular MIB view. If the value is
empty or if there is no active MIB view having this value then no access is granted.
Command mode: Global configuration
snmp-server access <1-32> write-view <1-32 characters>
Defines a write view name that allows you write access to the MIB view. If the value is empty
or if there is no active MIB view having this value then no access is granted.
Command mode: Global configuration
snmp-server access <1-32> notify-view <1-32 characters>
Defines a notify view name that allows you notify access to the MIB view.
Command mode: Global configuration
no snmp-server access <1-32>
Deletes the View-based Access Control entry.
Command mode: Global configuration
show snmp-server v3 access <1-32>
Displays the View-based Access Control configuration.
Command mode: All
Table 117 View-based Access Control Model Commands
Command Syntax and Usage