Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 223
SNMPv3 View Configuration
Note that the first five default vacmViewTreeFamily entries cannot be removed, and their
names cannot be changed.
snmp-server user <1-16> privacy-protocol {des|none}
privacy-password <password value>
This command allows you to configure the type of privacy protocol and the privacy password.
The privacy protocol protects messages from disclosure. The options are des (CBC-DES
Symmetric Encryption Protocol) or none. If you specify des as the privacy protocol, then
make sure that you have selected one of the authentication protocols (MD5 or
HMAC-SHA-96). If you select none as the authentication protocol, you will get an error
message.
You can create or change the privacy password.
Command mode: Global configuration
no snmp-server user <1-16>
Deletes the USM user entries.
Command mode: Global configuration
show snmp-server v3 user <1-16>
Displays the USM user entries.
Command mode: All
Table 116 SNMPv3 View Configuration Commands
Command Syntax and Usage
snmp-server view <1-128> name <1-32 characters>
This command defines the name for a family of view subtrees.
Command mode: Global configuration
snmp-server view <1-128> tree <1-32 characters>
This command defines MIB tree, which when combined with the corresponding mask defines
a family of view subtrees.
Command mode: Global configuration
Table 115 User Security Model Configuration Commands
Command Syntax and Usage