Technical data

BLADEOS 6.3 Command Reference
220
 Chapter 4: Configuration Commands BMD00186-B, April 2010
SNMPv3 Configuration
SNMP version 3 (SNMPv3) is an extensible SNMP Framework that supplements the SNMPv2
Framework by supporting the following:
 a new SNMP message format
 security for messages
 access control
 remote configuration of SNMP parameters
For more details on the SNMPv3 architecture please refer to RFC3411 to RFC3418.
Table 114 SNMPv3 Configuration Commands
Command Syntax and Usage
snmp-server user <1-16>
This command allows you to create a user security model (USM) entry for an authorized user.
You can also configure this entry through SNMP.
Command mode: Global configuration
To view command options, see page 222.
snmp-server view <1-128>
This command allows you to create different MIB views.
Command mode: Global configuration
To view command options, see page 223.
snmp-server access <1-32>
This command allows you to specify access rights. The View-based Access Control Model
defines a set of services that an application can use for checking access rights of the user. You
need access control when you have to process retrieval or modification request from an
SNMP entity.
Command mode: Global configuration
To view command options, see page 224.