Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 217
System SNMP Configuration
BLADEOS supports SNMP-based network management. In SNMP model of network management,
a management station (client/manager) accesses a set of variables known as MIBs (Management
Information Base) provided by the managed device (agent). If you are running an SNMP network
management station on your network, you can manage the switch using the following standard
SNMP MIBs:
 MIB II (RFC 1213)
 Ethernet MIB (RFC 1643)
 Bridge MIB (RFC 1493)
An SNMP agent is a software process on the managed device that listens on UDP port 161 for
SNMP messages. Each SNMP message sent to the agent contains a list of management objects to
retrieve or to modify.
SNMP parameters that can be modified include:
 System name
 System location
 System contact
 Use of the SNMP system authentication trap function
 Read community string
 Write community string
 Trap community strings
Table 113 System SNMP Commands
Command Syntax and Usage
snmp-server name <1-64 characters>
Configures the name for the system. The name can have a maximum of 64 characters.
Command mode: Global configuration
snmp-server location <1-64 characters>
Configures the name of the system location. The location can have a maximum of 64
characters.
Command mode: Global configuration
snmp-server contact <1-64 characters>
Configures the name of the system contact. The contact can have a maximum of 64
characters.
Command mode: Global configuration