Technical data

BLADEOS 6.3 Command Reference
216
 Chapter 4: Configuration Commands BMD00186-B, April 2010
NTP Server Configuration
These commands enable you to synchronize the switch clock to a Network Time Protocol (NTP)
server. By default, this option is disabled.
Table 112 NTP Configuration Commands
Command Syntax and Usage
[no] ntp primary-server {<host name>|<IP address>}
Prompts for the hostname or IP addresses of the primary NTP server to which you want to
synchronize the switch clock.
Command mode: Global configuration
[no] ntp secondary-server {<host name>|<IP address>}
Prompts for the hostname or IP addresses of the secondary NTP server to which you want to
synchronize the switch clock.
Command mode: Global configuration
ntp interval <5-44640>
Specifies the interval, that is, how often, in minutes, to re-synchronize the switch clock with
the NTP server.
Command mode: Global configuration
ntp enable
Enables the NTP synchronization service.
Command mode: Global configuration
no ntp enable
Disables the NTP synchronization service.
Command mode: Global configuration
show ntp
Displays the current NTP service settings.
Command mode: All