Technical data

BLADEOS 6.3 Command Reference
212
 Chapter 4: Configuration Commands BMD00186-B, April 2010
[no] tacacs-server backdoor
Enables or disables the TACACS+ back door for Telnet, SSH/SCP, or HTTP/HTTPS.
Enabling this feature allows you to bypass the TACACS+ servers. It is recommended that you
use Secure Backdoor to ensure the switch is secured, because Secure Backdoor disallows
access through the back door when the TACACS+ servers are responding.
The default setting is disabled.
To obtain the TACACS+ backdoor password for your G8124, contact your Service and
Support line.
Command mode: Global configuration
[no] tacacs-server secure-backdoor
Enables or disables TACACS+ secure back door access through Telnet, SSH/SCP, or
HTTP/HTTPS only when the TACACS+ servers are not responding.
This feature is recommended to permit access to the switch when the TACACS+ servers
become unresponsive. If no back door is enabled, the only way to gain access when
TACACS+ servers are unresponsive is to use the back door via the console port.
The default is disabled.
Command mode: Global configuration
[no] tacacs-server privilege-mapping
Enables or disables TACACS+ privilege-level mapping.
The default value is disabled.
Command mode: Global configuration
[no] tacacs-server command-authorization
Enables or disables TACACS+ command authorization.
Command mode: Global configuration
[no] tacacs-server command-logging
Enables or disables TACACS+ command logging.
Command mode: Global configuration
Table 110 TACACS+ Server Commands
Command Syntax and Usage