Technical data

BLADEOS 6.3 Command Reference
BMD00186-B, April 2010 Chapter 4: Configuration Commands
 209
radius-server retransmit <1-3>
Sets the number of failed authentication requests before switching to a different RADIUS
server. The default is 3 requests.
Command mode: Global configuration
radius-server timeout <1-10>
Sets the amount of time, in seconds, before a RADIUS server authentication attempt is
considered to have failed. The default is 3 seconds.
Command mode: Global configuration
[no] radius-server backdoor
Enables or disables the RADIUS backdoor for Telnet/SSH/HTTP/HTTPS.
The default value is disabled.
To obtain the RADIUS backdoor password for your switch, contact your Service and
Support line.
Command mode: Global configuration
[no] radius-server secure-backdoor
Enables or disables the RADIUS back door using secure password for
telnet/SSH/HTTP/HTTPS. This command does not apply when backdoor (telnet) is
enabled.
Command mode: Global configuration
radius-server enable
Enables the RADIUS server.
Command mode: Global configuration
no radius-server enable
Disables the RADIUS server.
Command mode: Global configuration
show radius-server
Displays the current RADIUS server parameters.
Command mode: All
Table 109 RADIUS Configuration Commands
Command Syntax and Usage