Manualshelf

Technical data

ManualsBrandsBlade Network Technologies ManualsComputer equipmentBLADEOS G8124
201202203204205206207208209210
BLADEOS 6.3 Command Reference
208
Chapter 4: Configuration Commands BMD00186-B, April 2010
RADIUS Server Configuration
no ssh enable
Disables the SSH server.
Command mode: Global configuration
show ssh
Displays the current SSH server configuration.
Command mode: All
Table 109 RADIUS Configuration Commands
Command Syntax and Usage
[no] radius-server primary-host <IP address>
Sets the primary RADIUS server address.
Command mode: Global configuration
[no] radius-server secondary-host <IP address>
Sets the secondary RADIUS server address.
Command mode: Global configuration
radius-server primary-host <IP address> key <1-32 characters>
This is the primary shared secret between the switch and the RADIUS server(s).
Command mode: Global configuration
radius-server secondary-host <IP address> key <1-32 characters>
This is the secondary shared secret between the switch and the RADIUS server(s).
Command mode: Global configuration
[default] radius-server port <UDP port number>
Enter the number of the UDP port to be configured, between 1500 - 3000. The default is 1645.
Command mode: Global configuration
Table 108 SSH Server Configuration Commands
Command Syntax and Usage